In this article, we go over the basic steps for pairing your scanner with your Ipad. Please note that you will need to place your scanner in basic mode for it to interface with GrowFlow. To do this we have attached the command barcode If you are attempting to pair your Socketmobile scanner to a Mac or Windows machine, please click the link Here.
Turn your scanner on and ensure that it is in pairing mode, the scan the following barcode to set it to basic mode.
2. Press and hold the Scan (A) and Power (B) buttons until you hear three beeps. This will power off the scanner.
3. Turn the scanner back on and navigate to the Settings app on your iPad.
4. Tap “Bluetooth”.
5. Then tap the Socket Scanner to pair.