Updated: 01/03/21
In this article, we go over the basic steps for pairing your Socket Mobile scanner with your iPad. Please note that you will need to place your scanner in "Basic" mode for it to interface with GrowFlow.
To do this:
Turn your scanner on and ensure that it is in pairing mode. Then, scan the barcode below to set it to "Basic" mode.
2. Press and hold the Scan (A) and Power (B) buttons until you hear three beeps. This will power off the scanner.
3. Turn the scanner back on and navigate to the Settings app on your iPad.
4. Tap “Bluetooth”.
5. Tap the Socket Scanner to pair.